Module 13 of 20 — B2B Sales Training
Fractional Uplifts Sales Training Module 13: Follow-up
Most B2B revenue is lost not in the first conversation but in the silence that follows it. Reps stop following up too early, follow up with the wrong message, or rely on a single channel until the prospect stops responding. This module covers how to design a multi-channel follow-up cadence that keeps qualified deals moving, how to re-engage prospects who have gone dark, and how to build the follow-up discipline that separates reps who close from reps who generate activity. Module 12 covered how to hold price when the buyer pushes back. This module covers how to stay in the conversation long enough to get to that moment.
Module at a glance
8–12
Touchpoints required before a qualified prospect converts or disqualifies
44%
Of reps give up after one follow-up — the majority of pipeline is abandoned too early
80%
Of sales require five or more follow-ups after the initial meeting
3×
Higher response rate from multi-channel cadences vs. email-only sequences
Where this module fits
Follow-up is the execution layer of the entire sales sequence. Every skill built in Modules 1 through 12 — the ICP, the value proposition, the discovery questions, the business case, the objection responses, the negotiation framework — is worthless if the rep stops following up before the buyer is ready to move. Most qualified deals are not lost to a competitor. They are lost to silence.
This module installs a structured follow-up discipline: a defined cadence with specific touchpoints, specific channels, and specific content at each step. Reps leave with a working cadence template they can deploy immediately, a re-engagement framework for prospects who have gone dark, and a set of channel-switching rules that prevent single-channel fatigue from killing active deals. The follow-up cadence guide in the Knowledge Center covers the tactical execution layer in detail.
This module connects directly to the sales process (Module 4), which defines the stage gates that follow-up is designed to advance, and to prospecting (Module 5), which determines whether the rep has enough pipeline to sustain a structured cadence. A fractional sales manager enforces cadence compliance through CRM hygiene reviews and pipeline inspection — not as a policing exercise, but as a coaching tool that surfaces which deals are going dark and why. See the full training program for how all 20 modules build on each other.
Learning objectives
Design a multi-channel follow-up cadence with defined timing and content at each step
Apply channel-switching rules to prevent single-channel fatigue from killing active deals
Write follow-up messages that add value at every touchpoint instead of repeating the pitch
Re-engage prospects who have gone dark without creating pressure that pushes them further away
Distinguish between a genuine stall and a dead deal — and respond to each correctly
Build a breakup message sequence that closes the loop while leaving the door open
Use CRM stage data to identify which deals need immediate follow-up intervention
Install a follow-up review cadence that keeps the entire team’s pipeline moving
Expert framework
The 7 Core Categories of Enterprise-Level B2B Follow-Up Cadence Mastery
To master follow-up at an expert, enterprise revenue leadership level — going beyond foundational cadences — the discipline breaks into seven core strategic and tactical categories. Each category has a strategic layer (the institutional framework leadership builds) and a tactical layer (the ground-level execution discipline reps deploy on every touch).
1. Asynchronous Value Framing & Information Architecture
Designing a systematic library of micro-assets — vertical engineering case studies, compliance diagnostics, operational risk frameworks — mapped to specific discovery pains. Leadership builds an architecture that treats every follow-up touch as an ongoing delivery of asymmetric insights rather than a passive request for attention. At the rep level, this means executing a strict four-part formula on every touch: the context (referencing a verified pain), the asset (a single low-friction data point), the impact (one-sentence validation), and the low-friction binary CTA.
2. Multi-Channel Sequencing & Asynchronous Pattern Swapping
Building behavioral frameworks that combat inbox fatigue and platform dependency. Leadership defines exact sequencing rules that prevent single-channel burnout while maximizing the contact matrix. Reps execute a multi-modal transition from email (touches 1–2) to warm phone and LinkedIn (touch 3) to hyper-personalized video (touch 5), incorporating the 90-second permission rule on warm calls to respect the buyer's calendar.
3. Pipeline Velocity Diagnostics & Momentum Management
Operationalizing next-step ownership so that no active pipeline opportunity exists without an explicit, mutually committed event calendar date logged. At the rep level, this means distinguishing a stall — slow response due to competing internal priorities or budget freezes — from a dead deal, and responding to each correctly: re-anchoring to the cost of inaction for a stall, deploying a clean breakup sequence to clear pipeline clutter for a dead deal.
4. Operational Risk & Burn-Rate Re-Anchoring
Creating institutional frameworks that convert calendar time into a hard fiscal burn rate, giving reps the tools to turn an abstract delay into a measurable balance-sheet penalty. The tactical execution is the cost-of-delay pitch: translating a four-week pause into a visceral financial reality — for example, a 30-day delay that keeps $30,820 in monthly operational leakage live — and using that number to reframe the buyer's silence against their own validated metrics.
5. Multi-Stakeholder Buying Circle Expansion
Moving away from single-threaded champion dependencies by building playbooks that require reps to systematically map and touch secondary and tertiary decision-influencers — spanning operations, procurement, compliance, and finance — using parallel, role-specific follow-up lines. The tactical layer is asymmetrical inbound alignment: coordinating with the primary champion to equip them with the precise financial assets needed to keep the conversation alive across other internal departments.
6. Contractual Friction & Macro Event Triggers
For physical product lines, capital equipment, and distribution spaces, value is tied to macro industry shifts rather than software testing steps. Leadership structures cadences around specific trigger events: incumbent contract expiration timelines (90 days out), manufacturing line expansions, seasonal capacity jumps, and documented supplier breakdowns. Reps execute trigger-based re-engagement by tracking these operational events precisely when switching friction drops to its lowest economic point.
7. Automated Pipeline Hygiene & CRM Inspection Governance
Programming the CRM from a passive documentation notebook into an active, automated deal-inspection system. Leaders implement dashboard rules that automatically flag and escalate deals that break compliance parameters. Reps populate required fields — last touch channel, current cadence step, next committed step date — that trigger red-flag alerts (deal in proposal-sent stage with more than seven days of silence and no committed next step) and cadence breach alerts (reaching touch 3 without a channel switch) to protect deal health.
Module 13 Knowledge Assessment
Take the 35-question Multi-Channel B2B Sales Follow-Up Cadence Quiz. Scored across all 7 categories with instant feedback, hints, and a full category breakdown at the end.
Start the Module 13 QuizRoot cause analysis
The Follow-Up Drop Diagnostic: Why Qualified Leads Disappear and What to Do About It
Most follow-up failures have the same four root causes. Identifying which one is driving the drop determines the fix. A symptom-level response — telling reps to follow up more — does not work if the underlying cause is message quality, channel selection, or timing.
Drop pattern
Root cause
Upstream fix
Drop pattern
Rep stops after 1–2 attempts with no response
Root cause
No defined cadence. Reps follow up when they remember to, which means inconsistently. After two unanswered emails, most reps assume the prospect is not interested and move on.
Upstream fix
Install a structured cadence with a defined number of touchpoints, defined timing, and a defined breakup message at the end. Reps should not decide when to stop — the cadence decides.
Drop pattern
Prospect responds to first outreach but goes dark after the demo or proposal
Root cause
No next-step ownership. The rep ended the meeting without a committed next step — a specific date, a specific action, a specific person. Without a next step, the deal has no momentum and the rep has no reason to follow up with urgency.
Upstream fix
Every meeting ends with a confirmed next step on the calendar before the rep leaves the call. A follow-up email sent within 24 hours summarizes what was discussed, what was agreed, and what happens next.
Drop pattern
Follow-up messages are sent but never get a response
Root cause
Message quality failure. The rep is sending the same generic message repeatedly — "just checking in," "wanted to follow up on my last email," "did you get a chance to review?" These messages add no value and train the prospect to ignore them.
Upstream fix
Each touchpoint must add something new: a relevant insight, a case study from a similar company, a specific question about their situation, or a piece of content that addresses a problem they mentioned in discovery.
Drop pattern
Email follow-ups go unanswered but the prospect is active on LinkedIn
Root cause
Single-channel dependency. The rep is following up exclusively by email and interpreting silence as disinterest. The prospect may be responsive on other channels but has email fatigue or a full inbox.
Upstream fix
Apply channel-switching rules: if two consecutive emails go unanswered, switch to phone or LinkedIn. If phone goes unanswered twice, try a video message. Multi-channel cadences have significantly higher response rates than email-only sequences.
Cadence design
The Multi-Channel Follow-Up Cadence: Six Touchpoints That Keep Qualified Deals Moving
A follow-up cadence is not a script. It is a framework that specifies channel, timing, and content type at each step while leaving room for personalization. The six-touchpoint structure below is designed for qualified prospects who have engaged with initial outreach but have not yet committed to a next step.
Touch 1
Day 1 — same day as initial meeting or proposal
Channel: Email
Meeting summary: what was discussed, what was agreed, what happens next. Attach any materials referenced. Confirm the next step that was agreed on the call. This is not a follow-up — it is a record of the conversation.
Reps who send this email within 24 hours of every meeting have significantly higher close rates. It signals professionalism, creates a paper trail, and anchors the next step before the buyer’s attention moves elsewhere.
Touch 2
Day 3 — two days after Touch 1
Channel: Email
One new piece of value: a relevant case study, a piece of content that addresses a problem they mentioned in discovery, or a specific insight about their industry or situation. Not a pitch — a contribution. End with a single, specific question.
The question at the end of Touch 2 is the most important element. It should be specific enough that the prospect can answer it in one sentence. "Are you still evaluating options for Q1?" is better than "Let me know if you have any questions."
Touch 3
Day 7 — four days after Touch 2
Channel: Phone or LinkedIn
Channel switch. If two emails have gone unanswered, switch to phone or LinkedIn. On the phone: reference the emails, acknowledge that they may be busy, and ask for 90 seconds to share one thing that is relevant to their situation. On LinkedIn: a short, personalized message — not a copy of the email.
The channel switch is the most important structural element of the cadence. Reps who stay on email after two non-responses are training the prospect to ignore them. A phone call or LinkedIn message signals that the rep is paying attention and is willing to work for the conversation.
Touch 4
Day 14 — one week after Touch 3
Channel: Email
A value-add touchpoint with a different angle: a new data point, a relevant news item about their industry, or a short observation about something they mentioned in the initial conversation. This touch is designed to demonstrate that the rep has been thinking about their situation, not just their pipeline.
Touch 4 is where most reps give up. The prospect has not responded to three touchpoints and the rep concludes they are not interested. In most cases, the prospect is busy, not disinterested. The rep who stays in the conversation at Touch 4 is the rep who gets the call when the prospect is ready to move.
Touch 5
Day 21 — one week after Touch 4
Channel: Phone or video message
A direct ask: a specific question about their current situation that requires a real answer. "Has anything changed on your end since we spoke?" or "Is the problem we discussed still a priority for Q1?" A video message (Loom or similar) has higher open rates than email at this stage because it signals effort and is novel.
Touch 5 is the last substantive touchpoint before the breakup message. The goal is to get a response — any response — that tells the rep whether the deal is alive or dead. A "not now" is a useful answer. Silence is not.
Touch 6
Day 30 — one week after Touch 5
Channel: Email
The breakup message. Explicitly close the sequence: "I have reached out a few times and have not heard back. I do not want to keep filling your inbox if the timing is not right. I am going to close out my follow-up for now — but if anything changes, I am easy to reach." Leave the door open. Do not burn the relationship.
The breakup message has the highest response rate of any touchpoint in the cadence. Prospects who have been ignoring follow-ups often respond to the breakup message because it removes the pressure. A response to Touch 6 — even a "not now" — is a qualified lead that can be re-engaged in 60 to 90 days.
Re-engagement strategy
Re-Engagement Framework: How to Revive Deals That Have Gone Dark
A prospect who goes dark is not a dead deal. In most cases, something changed internally — a budget freeze, a competing priority, a personnel change — and the rep was not positioned to survive the pause. The re-engagement framework gives reps a structured approach to reviving cold pipeline without creating the pressure that pushes prospects further away.
Silence duration
Likely cause
Re-engagement approach
Message frame
1–2 weeks
Busy. The prospect is not ignoring the rep — they are managing competing priorities. This is the most common cause of short-term silence.
Continue the standard cadence. Do not increase frequency. Switch channels if email has gone unanswered twice.
"I know things get busy. I wanted to share [one relevant piece of information] — no pressure on timing."
3–4 weeks
Internal change. A budget freeze, a personnel change, a competing initiative, or a decision-making process that is more complex than the prospect described.
Send a short, low-pressure note that acknowledges the silence without making it awkward. Ask one specific question about whether anything has changed.
"I have not heard back in a few weeks — I wanted to check in to see if anything has changed on your end before I close out my follow-up."
5–8 weeks
The deal has been deprioritized. The problem the rep was solving is still real, but it is no longer urgent enough to justify the rep’s time in the buyer’s calendar.
Re-anchor to the cost of inaction. Send a new piece of content that quantifies the ongoing cost of the problem they described in discovery. Do not reference the previous conversations — start fresh.
"I came across [relevant data or case study] that made me think of the challenge you described. Wanted to share it in case it is useful — no agenda."
9–12 weeks
The deal is cold but not dead. The prospect may have solved the problem another way, may be waiting for a budget cycle, or may have moved to a different role.
Send a single re-engagement email with a new trigger: a relevant industry event, a new case study, a product update, or a direct question about whether the problem is still on their radar.
"It has been a few months since we spoke. I wanted to reach out because [specific trigger]. Is [the problem we discussed] still something you are working on?"
Implementation note
Re-engagement only works if the CRM is current. A rep who cannot identify which deals have gone dark — and for how long — cannot execute a re-engagement strategy. CRM hygiene is the prerequisite for follow-up discipline. A fractional sales manager enforces this through weekly pipeline reviews that surface dark deals before they become dead ones.
Channel strategy
Channel Selection and Switching Rules: How to Use Email, Phone, LinkedIn, and Video Together
No single channel wins every follow-up. The rep who relies exclusively on email will lose deals to prospects who respond to phone. The rep who calls without emailing first will lose deals to prospects who prefer asynchronous communication. The channel strategy is not about preference — it is about maximizing the probability of a response at each step of the cadence.
Channel 1
Default starting channel — asynchronous, easy to personalize
When to use it
Touches 1, 2, 4, and 6 of the standard cadence. Email is the default channel for the first two touchpoints because it is asynchronous, easy to reference, and allows the prospect to respond on their own schedule.
When to switch away
After two consecutive emails with no response. Continuing to email a non-responsive prospect trains them to ignore the sender. Switch to phone or LinkedIn at Touch 3.
What makes it work
Short messages (five sentences or fewer), a single specific ask at the end, and a new piece of value at each touchpoint. Subject lines that reference the prospect’s specific situation outperform generic subject lines by a significant margin.
What kills it
"Just checking in" and "wanted to follow up on my last email" are the two most common follow-up email openers and the two most likely to be ignored. They signal that the rep has nothing new to offer.
Channel 2
Phone
Highest-conversion channel for qualified prospects who have already engaged
When to use it
Touch 3 (after two unanswered emails) and Touch 5 (the direct ask before the breakup message). Phone is the highest-conversion single touchpoint for qualified prospects because it is synchronous and personal.
The 90-second rule
When a prospect answers, ask for 90 seconds to share one thing that is relevant to their situation. Do not launch into a pitch. The 90-second frame is respectful of their time and easy to say yes to.
When they do not answer
Leave a voicemail that references the email they received and asks a specific question. Do not summarize the entire pitch in the voicemail. End with a specific callback time: "I will try you again Thursday at 2pm."
What kills it
Calling without context. A cold call to a prospect who has already engaged with email is not a cold call — it is a warm call. Reference the previous conversation immediately to establish context and reduce the prospect’s guard.
Channel 3
Effective for prospects who are active on the platform and less responsive to email
When to use it
Touch 3 as an alternative to phone, or as a supplementary channel throughout the cadence for prospects who are visibly active on LinkedIn. Check profile activity before deciding whether to use this channel.
What to send
A short, personalized message that is not a copy of the email. Reference something specific from their LinkedIn activity — a post they published, a comment they made, a company announcement. This signals that the rep is paying attention.
Connection requests
Send a connection request with a personalized note before sending a direct message. A connection request with no note is ignored. A connection request that references the previous conversation has a high acceptance rate.
What kills it
Sending the same message on LinkedIn that was already sent by email. The prospect sees this as lazy and it reduces the credibility of the follow-up. Every channel should have a distinct message.
Channel 4
Video Message
High open rates — signals effort and is novel in most B2B inboxes
When to use it
Touch 5 (the direct ask before the breakup message) or as a channel switch when email and phone have both gone unanswered. Video messages have significantly higher open rates than text emails at this stage of the cadence.
What to record
Keep it under 90 seconds. Start by showing the prospect’s name or company website on screen — this signals that the message is personalized, not a mass blast. Ask one specific question. End with a clear next step.
Tools
Loom is the most widely used tool for B2B video messages. It integrates with Gmail and generates a thumbnail preview that shows the rep’s face — which increases open rates compared to a plain link.
What kills it
A video message that is longer than two minutes. Prospects will not watch a two-minute video from a rep they have not met. The value of the video format is novelty and personalization — not length.
Field sales application
Follow-Up for Field Sales and Physical Product Businesses
Follow-up cadence design is often taught in a SaaS or inside sales context where all communication is digital. Field sales and physical product businesses face a different challenge: the rep has in-person relationships that create a different set of follow-up norms, and the buying cycle is often driven by operational events — a contract renewal, a product failure, a seasonal demand shift — rather than a software evaluation timeline. These six questions surface the follow-up triggers that are specific to field sales and physical product categories.
Six follow-up triggers for field sales and physical product businesses
Trigger question
1. When does their current supplier contract renew?
For distributors, manufacturers, and commodity suppliers
Why it matters
Contract renewal is the highest-probability follow-up trigger in physical product sales. A rep who knows the renewal date 90 days in advance has a structured reason to re-engage. A rep who does not know the renewal date is always reacting to a competitor who does.
Trigger question
2. What operational events create a buying window?
For equipment, components, and process inputs
Why it matters
A production line expansion, a facility move, a new product launch, or a quality failure all create buying windows that are invisible to reps who are not paying attention. Follow-up cadences for field sales should include a trigger-based re-engagement sequence tied to these operational events.
Trigger question
3. What is their seasonal demand pattern?
For seasonal categories and inventory-driven businesses
Why it matters
A buyer who is not interested in Q3 may be highly motivated in Q4. A follow-up cadence that accounts for seasonal demand patterns keeps the rep in the conversation at the right moment rather than the convenient one.
Trigger question
4. Who else in the organization influences the buying decision?
For complex B2B purchases with multiple stakeholders
Why it matters
In field sales, the rep often has a relationship with one contact but the buying decision involves procurement, operations, and finance. A follow-up strategy that only touches the primary contact misses the stakeholders who can accelerate or block the deal.
Trigger question
5. What does a failure event look like for their current supplier?
For quality-sensitive categories
Why it matters
A supplier failure — a quality issue, a delivery miss, a service breakdown — is the highest-urgency follow-up trigger in physical product sales. Reps who are in regular contact when a failure occurs are positioned to respond immediately. Reps who have gone dark are not in the conversation.
Trigger question
6. What is the cost of switching suppliers for this buyer?
Universal — applies to every physical product category
Why it matters
High switching costs mean the buyer needs a stronger reason to change. Low switching costs mean the rep needs to follow up more consistently to stay top of mind. Understanding the switching cost determines the follow-up intensity and the message frame at each touchpoint.
Concrete Message Templates and Copy Formulas
Every value-add email must follow a strict four-part architecture. Every phone touch must stay inside 90 seconds. Below are the exact formulas and copy-pasteable templates for each.
The Value-First Email Formula
For Touch 2 (Day 3) and Touch 4 (Day 14) — four mandatory parts
The Context
Reference the specific pain point or goal discussed in the initial meeting. Never open cold.
The Asset
Introduce a single, low-friction piece of relevant content or data. One asset only — multiple links dilute attention.
The Impact
Briefly state how a similar company used this information to solve a parallel problem. One sentence maximum.
The Low-Friction CTA
End with a highly specific, single binary question that requires minimal cognitive load to answer. Yes/no or a simple date choice.
Template: Touch 2 — Day 3 Value-Add Email
Subject: [Prospect Name] — relevant resource for [Specific Goal/Pain Point]
Hi [Prospect Name],
During our conversation on [Day of Week], you mentioned that optimizing your team’s [Specific Process] was a major priority for this quarter.
I came across this brief case study highlighting how a similar firm in the [Industry Name] space reduced their operational lag by [Percentage/Metric] using the framework we discussed. Pages 2 and 3 outline the exact implementation steps.
Are you still actively evaluating alternative approaches to address that [Process] bottleneck this month?
Best regards,
[Your Name]
Template: Touch 6 — Day 30 Breakup Email
Subject: Closing out my files / [Company Name]
Why this works: The breakup email removes buying pressure, which counterintuitively yields the highest response rate in the entire cadence. Prospects who were avoiding you will often re-engage when they believe the conversation is closing.
Hi [Prospect Name],
I have reached out a few times regarding our conversation about [Core Challenge] and haven’t heard back. I know priorities shift rapidly, and I certainly don’t want to crowd your inbox if the timing isn’t right.
I am going to close out my follow-up file on this for now.
If this becomes a priority for your team again down the road, you can easily reach me right here.
Wishing you all the best,
[Your Name]
The 90-Second Warm Call Script
For Touch 3 (Day 7) and Touch 5 (Day 21) — four timed segments
The Opener
0 – 15 seconds
“Hi [Prospect Name], this is [Your Name] with [Your Company]. I’m calling because we spoke last week about your [Specific Goal], and I promised to keep an eye out for a solution to that [Specific Bottleneck] issue.”
The Permission Frame
15 – 30 seconds
“I know I caught you completely out of the blue. Do you have 90 seconds to go over one quick data point that just came across my desk regarding this, or did I catch you at a terrible time?”
The Value Delivery
30 – 60 seconds
“Perfect. We just finished analyzing data from our newest deployment, and it turns out that automating [Feature] actually saves teams an average of 12 hours a week — which directly addresses the resource constraint you voiced.”
The Next-Step Lock
60 – 90 seconds
“I don’t want to eat up your day right now. Would it make sense to open up our calendars for 10 minutes this coming Thursday at 2:00 PM to see if that same model applies to your infrastructure?”
Stall vs. Dead Deal: The Definitive Diagnostic
Reps frequently mistake a deal that has temporarily lost momentum for one that is permanently unviable. Misdiagnosing these scenarios leads to wasted activity on dead deals or abandoned pipeline that could still close.
Diagnostic factor
The Stall
Qualified / active intent
The Dead Deal
Disqualified / no intent
Root Cause
Internal friction, budget freezes, or competing executive priorities.
The core problem was solved internally, or the champion left the company.
Prospect Behavior
Slow or irregular responses; explicitly states they are “busy” or need to “push things out.”
Total silence across all channels extending past the standard 30-day cadence windows.
Strategic Response
Patience & Value Delivery. Maintain a low-frequency, high-value cadence. Re-anchor to the financial cost of doing nothing.
Execute Breakup Sequence. Cleanly close the loop in the CRM, archive the deal, and schedule a macro re-engagement trigger for 90 days out.
CRM Field Mapping and Automated Pipeline Alert System
Follow-up discipline cannot scale without strict systems of record. These five custom fields and two automated alert triggers enforce cadence compliance at the CRM level — removing reliance on rep memory or manager inspection.
Core custom CRM fields required
Five mandatory fields beyond basic deal stages
Last_Touch_Channel
Dropdown
Email, Phone, LinkedIn, Video, In-Person. Enforces channel-switching compliance and flags single-channel dependency.
Current_Cadence_Step
Integer (1–6)
Corresponds directly to the six-touchpoint cadence. Managers can see at a glance where every deal sits in the sequence.
Next_Committed_Step_Date
Date field
The specific date a next action is mutually agreed to occur. A blank field is a pipeline risk signal — no committed next step means the deal is drifting.
Silence_Duration_Days
Formula field
Automated calculation: Current_Date minus Last_Activity_Date. Feeds the Red Flag Alert trigger below without requiring manual manager review.
Disqualification_Reason
Dropdown
Competitor Chosen, Internal Solution, Champion Left, Budget Eliminated, No Response (Dead). Required before archiving any deal — builds a disqualification pattern library over time.
Automated pipeline alert triggers
Two CRM dashboard rules that surface compliance failures automatically
Stage = “Proposal Sent”
AND Silence_Duration_Days > 7
AND Next_Committed_Step_Date = blank
Flags any active deal sitting in Proposal Sent with more than a week of silence and no committed next step. These deals are at highest risk of going dark permanently.
Current_Cadence_Step = 3
AND Last_Touch_Channel = “Email”
Flags any deal where the rep reached Touch 3 without switching channels. Touch 3 mandates a phone or LinkedIn contact — staying on email at this stage signals a cadence execution failure.
Common questions
Frequently Asked Questions
People also ask
Related Questions
Terminology
Related Terms
Follow-up cadence
A structured sequence of touchpoints — defined by channel, timing, and content — executed after an initial meeting or outreach. A cadence removes the decision of whether to follow up from the rep and replaces it with a system that runs consistently.
Multi-channel sequencing
A follow-up strategy that uses two or more communication channels — email, phone, LinkedIn, video message — in a defined sequence. Multi-channel cadences have significantly higher response rates than single-channel sequences because they meet the prospect where they are most responsive.
Channel switching
The practice of moving to a different communication channel after two consecutive touchpoints on the same channel go unanswered. The most common switch is from email to phone or LinkedIn at Touch 3 of the standard cadence.
Breakup message
The final touchpoint in a follow-up cadence that explicitly closes the sequence. A well-written breakup message removes pressure, leaves the door open, and has the highest response rate of any touchpoint in the cadence because it signals that the rep is not going to keep following up indefinitely.
Re-engagement sequence
A structured approach to reviving cold pipeline — prospects who have gone dark after initial engagement. The re-engagement strategy varies by silence duration: 1–2 weeks (continue cadence), 3–4 weeks (acknowledge silence), 5–8 weeks (re-anchor to cost of inaction), 9–12 weeks (new trigger).
Next-step ownership
The practice of ending every sales meeting with a committed next step — a specific date, a specific action, and a specific person accountable for it — confirmed before the rep leaves the call. Without next-step ownership, deals lose momentum and follow-up loses urgency.
Dark prospect
A qualified prospect who has stopped responding after initial engagement. A dark prospect is not a dead deal — in most cases, something changed internally and the rep was not positioned to survive the pause. The re-engagement framework is designed specifically for dark prospects.
Video message
A short personalized video (under 90 seconds) sent as a follow-up touchpoint, typically via Loom. Video messages have higher open rates than text emails at later stages of the cadence because they signal effort and are novel in most B2B inboxes.
Follow-up drop
The point at which a rep stops following up on a qualified deal before the prospect has explicitly disqualified. The four root causes of follow-up drop are: no defined cadence, no next-step ownership, message quality failure, and single-channel dependency.
Trigger-based re-engagement
A re-engagement approach that uses a specific external event — a contract renewal date, a supplier failure, a seasonal demand shift, a relevant industry announcement — as the reason for reaching out to a cold prospect. Trigger-based re-engagement has higher response rates than time-based re-engagement because it is relevant rather than arbitrary.
CRM pipeline hygiene
The practice of keeping deal records current in the CRM — accurate stage, accurate close date, accurate next step. Pipeline hygiene is the prerequisite for follow-up discipline: a rep who cannot identify which deals have gone dark cannot execute a re-engagement strategy.
Stall vs. dead deal
A stall is a qualified deal that has lost momentum due to an internal change — the problem is still real and the buyer still has intent. A dead deal is one where the problem has been solved another way or the decision-maker has left. Stalls respond to patience and a re-engagement trigger. Dead deals respond to a clean breakup message.
Further reading
Related Reading
Module 13 of 20
Install a Follow-Up Discipline That Recovers Qualified Pipeline
Most B2B revenue is lost not in the first conversation but in the silence that follows it. A fractional sales manager from Fractional Uplifts installs a structured follow-up cadence across your team — defined touchpoints, defined channels, defined content — and enforces it through CRM hygiene and pipeline reviews until the behavior is consistent. If your reps are discounting before the buyer even asks, the root cause is usually upstream: they stopped following up before the buyer was ready to move. Module 12 covers how to hold price when the buyer pushes back. Fix the follow-up discipline first, then install the negotiation framework. View the full fractional sales leadership engagement to see how the sequence builds. A fractional VP of sales, interim sales manager, or outsourced sales manager can own the follow-up system end-to-end. Our sales coaching and sales diagnostics engagements identify whether follow-up failure is a skill gap or a system gap before you invest in a fix.